[Pumptesting] Pump Test Failure?

[Julius Gaisford]

Hello all,

I am doing the test right now, and I had some issues. First, the reservoir
is low at 5.4 ft. I noted this and moved on, but when I was undoing the
valve to begin running the pump, the alarm started blaring at 90 psi
instead of the usual 80. The water did not discharge. I take it that this
is a failed test?

I will complete the list and reset the alarm, since I am not sure where
else to go from here.

Thank you,
Julius Gaisford
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawyerhill.org/pipermail/pumptesting/attachments/20250804/ccbf2eb5/attachment-0001.html>