[Pumptesting] Test aborted due to error

[Phéna Proxima]

Thanks Daver. Adding this to the SH trustee manual and printing it out for storage in the PH for reference.

Adam

On Tue, Jul 15, 2025 at 7:48 PM, David Ritchie <[daver at theworld.com](mailto:On Tue, Jul 15, 2025 at 7:48 PM, David Ritchie <<a href=)> wrote:

> For future reference, I used the advanced technique of turning it off and back on again.
>
> Here's how to do it:
>
> Put the system on test.
> There are two big on-off levers on the cabinet, where the two parts of the cabinet join. Up is on and down is off. Turn off the right lever, and then the left. The alarm panel on the water side will start beeping with a supervisory error.
> Wait five seconds.
> Turn on the left lever and then the right.
> Watch to see if it boots up ok.
> Go reset the alarm on the panel on the water side.
>
> The left lever switches power from the grid and the right lever switches power from the generator. Turning the right off first and on last prevents the generator from kicking on.
>
> Dave
>
> On Tue, Jul 15, 2025 at 7:41 PM Courtney Lewis < courtney.d.lewis at gmail.com> wrote:
>
>> Dave Ritchie just found a way to reset this and I am running the weekly pump test now.
>>
>> Sent from my phone with the “help” of my two young ones
>>
>>> On Jul 14, 2025, at 6:27 PM, Phéna Proxima < adam at phenaproxima.net> wrote:
>>
>>> 
>>> Mike tried to run a pump test but ran into a wall because the controller is displaying a weird error:
>>>
>>> "INITIALIZING
>>> OID 2 VER 1.3"
>>>
>>> What the hell does this mean? Do I need to call Encore?
>>>
>>> A
>>>
>>> _______________________________________________
>>> Pumptesting mailing list
>>> Pumptesting at lists.sawyerhill.org
>>> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawyerhill.org/pipermail/pumptesting/attachments/20250715/633bd53e/attachment.html>