[Pumptesting] Test aborted due to error
Mike Gaisford
mgaisford at gmail.com
Wed Jul 16 12:01:58 EDT 2025
Thank you
On Wed, Jul 16, 2025 at 8:34 AM Courtney Lewis <courtney.d.lewis at gmail.com>
wrote:
> I did the test yesterday after Dave reset
>
> Sent from my phone with the “help” of my two young ones
>
>
> On Jul 16, 2025, at 11:02 AM, Mike Gaisford <mgaisford at gmail.com> wrote:
>
>
>
> Thank you for resolving.
>
> I’m in CA. Can anyone do the test.
>
> On Tue, Jul 15, 2025 at 4:51 PM Phéna Proxima <adam at phenaproxima.net>
> wrote:
>
>> Thanks Daver. Adding this to the SH trustee manual and printing it out
>> for storage in the PH for reference.
>>
>> Adam
>>
>>
>>
>> On Tue, Jul 15, 2025 at 7:48 PM, David Ritchie <daver at theworld.com
>> <On+Tue,+Jul+15,+2025+at+7:48+PM,+David+Ritchie+%3C%3Ca+href=>> wrote:
>>
>> For future reference, I used the advanced technique of turning it off and
>> back on again.
>>
>> Here's how to do it:
>>
>> Put the system on test.
>> There are two big on-off levers on the cabinet, where the two parts of
>> the cabinet join. Up is on and down is off. Turn off the right lever, and
>> then the left. The alarm panel on the water side will start beeping with a
>> supervisory error.
>> Wait five seconds.
>> Turn on the left lever and then the right.
>> Watch to see if it boots up ok.
>> Go reset the alarm on the panel on the water side.
>>
>>
>> The left lever switches power from the grid and the right lever switches
>> power from the generator. Turning the right off first and on last prevents
>> the generator from kicking on.
>>
>> Dave
>>
>> On Tue, Jul 15, 2025 at 7:41 PM Courtney Lewis <
>> courtney.d.lewis at gmail.com> wrote:
>>
>>> Dave Ritchie just found a way to reset this and I am running the weekly
>>> pump test now.
>>>
>>> Sent from my phone with the “help” of my two young ones
>>>
>>>
>>> On Jul 14, 2025, at 6:27 PM, Phéna Proxima < adam at phenaproxima.net>
>>> wrote:
>>>
>>>
>>>
>>> Mike tried to run a pump test but ran into a wall because the controller
>>> is displaying a weird error:
>>>
>>> "INITIALIZING
>>> OID 2 VER 1.3"
>>>
>>> What the hell does this mean? Do I need to call Encore?
>>>
>>> A
>>> _______________________________________________
>>> Pumptesting mailing list
>>> Pumptesting at lists.sawyerhill.org
>>> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
>>>
>>> _______________________________________________
>> Pumptesting mailing list
>> Pumptesting at lists.sawyerhill.org
>> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
>>
> _______________________________________________
> Pumptesting mailing list
> Pumptesting at lists.sawyerhill.org
> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawyerhill.org/pipermail/pumptesting/attachments/20250716/4ce311ec/attachment.html>
More information about the Pumptesting
mailing list