[Pumptesting] Pump Test Failure?

[Ross Harpestad]

Get the water level in the tank back up and test again. In any case, bring
this is with Adam asap



On Tue, Aug 5, 2025 at 08:39 Mike Gaisford <mgaisford at gmail.com> wrote:

> Anyone know the next steps?
>
> On Tue, Aug 5, 2025 at 3:00 AM Julius Gaisford <dajulius at gmail.com> wrote:
>
>> Hello all,
>>
>> I am doing the test right now, and I had some issues. First, the
>> reservoir is low at 5.4 ft. I noted this and moved on, but when I was
>> undoing the valve to begin running the pump, the alarm started blaring at
>> 90 psi instead of the usual 80. The water did not discharge. I take it that
>> this is a failed test?
>>
>> I will complete the list and reset the alarm, since I am not sure where
>> else to go from here.
>>
>> Thank you,
>> Julius Gaisford
>> _______________________________________________
>> Pumptesting mailing list
>> Pumptesting at lists.sawyerhill.org
>> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
>>
> _______________________________________________
> Pumptesting mailing list
> Pumptesting at lists.sawyerhill.org
> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawyerhill.org/pipermail/pumptesting/attachments/20250805/135b34e0/attachment.html>