[Pumptesting] Pump Test Failure?

[Phéna Proxima]

I am in Canada for most of the month, but I will see if I can get some advice on this one.

Adam
On Tuesday, August 5th, 2025 at 8:59 AM, Ross Harpestad <grsshppr at kumango.net> wrote:

> Get the water level in the tank back up and test again. In any case, bring this is with Adam asap
>
> On Tue, Aug 5, 2025 at 08:39 Mike Gaisford <mgaisford at gmail.com> wrote:
>
>> Anyone know the next steps?
>>
>> On Tue, Aug 5, 2025 at 3:00 AM Julius Gaisford <dajulius at gmail.com> wrote:
>>
>>> Hello all,
>>>
>>> I am doing the test right now, and I had some issues. First, the reservoir is low at 5.4 ft. I noted this and moved on, but when I was undoing the valve to begin running the pump, the alarm started blaring at 90 psi instead of the usual 80. The water did not discharge. I take it that this is a failed test?
>>>
>>> I will complete the list and reset the alarm, since I am not sure where else to go from here.
>>>
>>> Thank you,
>>> Julius Gaisford
>>> _______________________________________________
>>> Pumptesting mailing list
>>> Pumptesting at lists.sawyerhill.org
>>> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
>>
>> _______________________________________________
>> Pumptesting mailing list
>> Pumptesting at lists.sawyerhill.org
>> http://lists.sawyerhill.org/mailman/listinfo/pumptesting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sawyerhill.org/pipermail/pumptesting/attachments/20250805/bf73ebbb/attachment.html>